BIOLOGICAL INCUBATOR ( +5 °C | +80°C)

 

EMBI 100

WordPress Responsive Table

  • The device has a temperature adjustment range from +10°C above ambient temperature up to 80°C.
  • The temperature distribution in the device varies between +/-0.1 °C and +/-0.5 °C.
  • The insulation material of the device is provided with 50mm thick rock wool material that can provide insulation up to +400°C.
  • The heating system of the device is made with a heating element.
  • There is a PID control system in the heating system of the device. Thanks to the PID control system, the device keeps the temperature in the cabin constant at the set temperature. In this way, both energy saving and temperature fluctuations in the cabin are minimized.
  • The sensor that detects the temperature in the device is a j-type thermocouple
  • The inside of the device is made of 304 stainless steel material. This minimizes the risk of contamination inside the device.
  • The device has a delayed start feature. Delayed start means that after the device reaches the set value, the timer set for countdown starts counting down. Thus, the media or microorganisms placed for incubation are incubated for the required time.
  • Thanks to the circulation fan in the device, equal temperature goes to every point in the cabinet. Thus, each incubated sample reaches the same temperature value. This provides more stable incubation
  • The timer of the device can be set up to a maximum of 99 minutes. When the timer of the device is set to 99 minutes, the same temperature can operate for 99 minutes after reaching the set value.
  • The device also has an indefinite mode. When the timer of the device is set to 00 minutes, the device operates continuously until it is turned off by the user.
  • The resistance power used in the device varies between 500Watt and 1200Watt depending on the liter of the device.
  • The device operates with 220 Volt/50Hz energy
MedIcal Cooling & HeatIng Systems