WATER BATH (Rt +5°C | +45°C)
ESB 10
| TECHNICIAL SPECIFICATIONS | |
| Temperature Range | +5 / +99°C |
| Set Point | +45°C |
| External Dimensions (WxLxH) mm | 362x333x410 |
| Internal Dimensions (WxLxH) mm | 327x298x199 |
| Volume | 20 L |
| Rock Wool (mm) | 17,5 mm |
| Packaged Dimensions (WxLxH) mm | 520x420x530 mm |
| Gross KG | 21 Kg |
| Interior Lighting | – |
| Alarm | – |
| Internal Surface | Stainless Steel Cr-Ni 304 |
| External Surface | Galvanized sheet with electrostatic paint |
| Heating / Cooling System | Electricity |
| Insulation | Rock Wool |
| Castor | Ball Joint |
| Tempreature Sensor | NTC |
| Control System | PID |
| Power | 1137 Watt |
| Voltage | 220v-50hz |
| Amper | 5 Amper |
- The device is used to ensure that the chemicals used in laboratories are heated without being exposed to open flame.
- The device ensures that chemical solutions and samples are kept constant at the desired temperatures for the desired periods of time.
- The device provides homogenous temperature distribution in the inner boiler with circulation pump.
- Glass wool is used as insulation material on the upper part of the device.
- Since there is no heater or pump in the chamber, there is no loss in net volume.
- The device provides precise temperature measurement thanks to its microprocessor control.
- The device has an additional safety measure against overheating with an adjustable safety thermostat between 30 - 90 degrees.
- There is a drainage system for draining excess water from the device.
- The inner chamber is made of monoblock stainless steel with rounded corners to reduce the risk of contamination in the device.
- The outer body is stainless steel made of electrostatic painted galvanised sheet.
- The device allows the user to programme between 0 and 99.99 hours.
- The device offers a wide range of applications with delayed start and indefinite operation mode.
- All medical devices manufactured by Emsaş A.Ş. are guaranteed for 2 years.